MPO MT Polishing Jig Fixture Cleaning Machine

product performance

1. Power supply voltage: direct AC / 220V, built-in 24V switching power supply, all control systems are converted into 24V.

2. The washing machine uses built-in closed operation, the surrounding environment without pollution, through the pressure and pressure once to complete the cleaning process.

Instructions

1. Connect the power, turn on the power switch, that is, the first screen

2. Press the left down arrow to enter the second screen (ie, the cleaning operation screen).

3. Place the grinder with the grinding fluid into the washer and flatten it, close the door, then press the operation screen F8,

It will complete the entire cleaning process at once

4. Open the door and remove the clean fixture and product.

5. The washing machine is equipped with an adjustable process. Customers can according to their own needs, in the parameter settings screen inside, right

Cleaning time to adjust.

6. The washing machine is also equipped with a separate cleaning process. Such as F1 for the water, F2 for the next gas, F3 for the gas, F4 for the next

Gas water, F5 for the upper and lower gas, F6 reset.

Each process can be adjustable time, can also be used alone, F8 for the automatic.

7. If you need to adjust the parameters first press the left arrow down, the parameter setting screen appears, you can adjust, and then press

The next right down the arrow, the screen the first process of water began to flash, and then press the lower right of the number keys to adjust

You can, and so on, after adjustment and then back to the clean operation of the screen.

8. Manual screen:

Manual screen, is used to check the operation of the situation, usually do not need to use.

9. At the start of the machine must be on the nozzle on the front of the arrow; (turn off the power, hand the nozzle on the cross arrows turn

Move to the designated location), while the cross of the gas pipe around the circled around the state.

Precautions

1. The washing machine water, electricity, gas integrated in a chassis inside, although done waterproofing, but the customer must pay attention to prevent water

Into the power supply, the socket, the shell and the operation panel do not touch the water, to prevent leakage and damage to electrical appliances

2. If there is leakage, the chassis is equipped with leakage protection switch, equipped with emergency stop switch, can immediately press the power failure

3. If there is a malfunction, all parts of the washing machine are not allowed to be disassembled without permission. Customers can contact with the manufacturers, otherwise

Consequences.

4. To extend the life of the machine, turn off the power when it is not working.

5.The equipment is simple and easy to operate, to protect the workshop environment plays a very important role, and greatly improve the work efficiency.

6.Without the permission of the manufacturer, shall not privately dismantle the machine. Under normal use, the warranty period is one year and man-made damage is not covered by the warranty. If you have any questions, please contact the manufacturer, otherwise not warranty.