Connectors End Face Integral Inspection Fiber Optic Microscope
HX-1005
Power supply:DC 12V
Image input port :RCA
Focus mode:Manual
Size:288mm*230mm*190mm
CCD resolution:1/3"420 lines
Power consumption:3w
Operating temperature:+10℃ ~ +50℃
Storage temperature:0℃ ~ +55℃
Image input/output format:Analog PAL
Image input port :RCA
Focus mode:Manual
Size:288mm*230mm*190mm
CCD resolution:1/3"420 lines
Power consumption:3w
Operating temperature:+10℃ ~ +50℃
Storage temperature:0℃ ~ +55℃
Image input/output format:Analog PAL
Quantity
Description:
HX-1005 series can enlarge fiber end by 200x,400x or 80x magnification. Baseline is according with end face diameter measured on 8-inch screen. Then enlarged picture of fiber end face is showed on display through video signal. Finally fiber end defects can be easily found at a glance on the display. HX-1005 series start work when power on. No cables between display and microscope makes it easy to manipulate, fast to work,and most of all greatly enhances work efficiency.
HX-1005 series can quickly check blemish, scratch and chipping etc. defects on fiber jumper and fiber ferrule. Operators just need to visually inspect fiber end on LCD screen instead of directly view on it. Therefore no harm on human eyes. As well known, harm is made by laser in fiber when operators directly view fiber end.
Feature:
*Photograph
*Image save
*Image delete
*X/Y axis adjustable
*External monitor connection
* External signal input
*External USB signal input
* External AV signal input
* Brightness adjustable
* Contrast adjustable
*Saturation adjustable
*Clock
* External SD card connection